Cyclists.com

Munich to Venice by Bike

209 km cycling route3 stages1,039 m climbing2 countriesGPX

Cycle from Oberding to Jenbach over 3 stages covering 209 km and 1,039 m of climbing through Germany and Austria. Ridden by Marcus from 18 to 20 September 2026. Every stage has a map, elevation profile, road facts and a GPX file.

Route at a glance

Distance
209 km
Climbing
1,039 m
Stages
3
3 riding days
Countries
2
Germany, Austria
Average stage
70 km
346 m climbing
Longest stage
81.9 km
Stage 3: Holzkirchen to Jenbach
Most climbing
721 m
Stage 3: Holzkirchen to Jenbach
Riding time
~11 h
moving time, estimated
Surface
Mostly paved
88% paved · 12% unpaved · 1% no data
Bike
Road bike with sturdy tyres, or gravel bike
from the mapped surface
GPX
Every stage + whole tour
Start
Oberding
Finish
Jenbach

Full route map

3 stages in alternating colours; a dot marks each stage start.

Ridden stagesStage start

Download the whole tour as one GPX(a track per stage), or each stage’s file from the itinerary below.

Itinerary: 3 stages

Average 70 km and 346 m a stage. Longest day: stage 3 (81.9 km). Most climbing: stage 3 (721 m). Shortest: stage 1 (53.1 km).

Tour itinerary: stages in order with date, start and finish, countries, distance, climbing, surface, difficulty, riding time and GPX
StageRouteCountryDistanceClimbingSurfaceDifficultyTimeGPX
1Oberding to HallbergmoosGermany53.1 km51 mMostly pavedEasy2–3 hours GPX
2Hallbergmoos to HolzkirchenGermany73.6 km267 mMostly pavedModerate3–4½ hours GPX
3Holzkirchen to JenbachAustria81.9 km721 mMixed surfaceModerate4–5½ hours GPX

The route, country by country

Oberding → Germany → Austria → Jenbach

  1. Germany

    Stages 1–2, 127 km: Oberding → Hallbergmoos → Holzkirchen. Flat (318 m of climbing), 16% on cycle paths or lanes.

  2. Austria

    Stage 3, 82 km: Holzkirchen → Jenbach. Rolling (721 m of climbing), 8% on cycle paths or lanes.

How difficult is this tour?

209 km and 1,039 m of climbing over 3 stages: 70 km and 346 m a stage on average.

The longest day is stage 3, Holzkirchen to Jenbach (81.9 km); the most climbing is on stage 3, Holzkirchen to Jenbach (721 m); the shortest is stage 1, Oberding to Hallbergmoos (53.1 km).

At 70 km a day on average, it suits riders used to back-to-back days of 60–90 km.

Riders can go faster or slower than the documented itinerary: the same 209 km is 4 riding days at 60 km a day, 3 riding days at 80 km a day and 3 riding days at 100 km a day.

Surface and traffic

Predominantly paved: 88% is mapped as paved, 12% as unpaved or gravel.

27 km (13%) is on cycle paths or roads with a cycle lane; 17 km (8%) is on main roads without one, and 9 km on roads with a limit of 80 km/h or more.

Best time to ride

This tour was ridden in September 2026.

Logistics

Accommodation
3 of 3 stage finishes have a hotel, guesthouse or campsite mapped within a short ride of the finish.

Photos from the road

Questions riders ask

Can you cycle from Oberding to Jenbach?

Yes. Marcus rode it in 3 stages from 18 to 20 September 2026, 209 km in all.

How far is Oberding to Jenbach by bike?

209 km along this route, in 3 stages averaging 70 km.

How long does it take to cycle from Oberding to Jenbach?

The documented trip took 3 riding days over 3 calendar days. Moving time is estimated at about 11 hours. At 60 km a day it is 4 days, 80 km a day it is 3 days and 100 km a day it is 3 days.

How much climbing is involved?

1,039 m in total. The most climbing in a day is 721 m on stage 3, Holzkirchen to Jenbach.

How difficult is the route?

At 70 km a day on average, it suits riders used to back-to-back days of 60–90 km. The longest day is 81.9 km.

Is it suitable for a road bike?

88% of the route is mapped as paved and 12% as gravel or unpaved (1% has no surface data). Based on that: road bike with sturdy tyres, or gravel bike.

Is there a GPX file?

Yes. Every stage has its own GPX download, and the whole tour is available as one GPX file with a track per stage.

What is the best time of year?

This tour was ridden in September 2026.

About this tour

Ridden by
Marcus
Dates ridden
to · 3 riding days
Route lines
Each stage is built from the rider’s GPS recordings.
Elevation
Recalculated from the Copernicus GLO-90 terrain model every 50 m.
Roads and surface
Measured along each stage from OpenStreetMap extracts.
GPX
A file per stage, generated from its line (no timestamps), and one file for the whole tour with a track per stage.
Page added
Page last updated